MS ENERGY eBike c500, Instruction Manual

Page: 396 / 424

ENG
31
if the feet are too open or narrow; the speed should maintain uniform, or else the
drivers may feel tired; it in particular notes that the hook pulling action of the latter
part will hook the Pedal up.
 Slowdown technology: the speed change gear slows down but does not accelerate,
as is to seek for the stability of the number of change is used for more labor‐saving
and comfortable, and the time for speed change is 1: climbing, 2: uphill, 3: uneven
road surface, 4: against the wind and 5: when feeling tired. It can also be said the
time is when feeling not comfortable in the process of riding.revolutions of the
Pedal, so as to relieve the fatigue arising from uneven force. So, the speed
 Brake technology: as we all know the principle of hard braking is first stopping the
brake and then stopping the bike, then stopping the front brake, but in case of an
emergency, everyone will stop all together. If the braking distance is appropriate,
the bike can stop securely; if the slowdown is too fast, people often would be thrown
forward and in order to prevent this danger, the best way is intermittent braking,
and meanwhile the hip is pushed backward. In rainy days, increase the braking
distance due in safety and reduce the running speed.
Riding in Wet Conditions

This electric bicycle can withstand light rain and small splashes, but is not designed
to be subjected to inclement weather, heavy showers, or submersion in water. Use
caution when riding in wet conditions as it will take longer to use the brakes to slow
down, and also when turning as the tires may slip. The electrical components on the
bike are not fully waterproof, and water damage is not covered under warranty.
Riding at Night
 Riding at night comes with more risks than riding during the day due to decreased
visibility so riders are encouraged to exercise increased caution. Before riding at
night make sure that reflectors are installed on your eBike. For increased visibility
also ensure the front headlight and rear tail light are turned on and adjusted such
that other people on the road can see them clearly. Riders should wear bright
colored clothing at night.