MS ENERGY eBike c500, Instruction Manual

Page: 369 / 424

ENG
4
4. Do not operate your electric bike after consuming any amount of
alcohol or taking any drugs
5. Always Check Bike, Brakes, Tires and Screws/Nuts for Tightness
Before Riding.
6.
WARNINGS

NEVER carry a passenger on the Electric Bike!

NEVER modify the Electric Bike with unapproved accessories

NEVER ride through deep water

NEVER perform wheelies, jumps or trick stunts.

AVOID riding in the rain for long periods of time.

AVOID water contact to motor and electric lines.

ALWAYS keep both hands on handlebars.

ALWAYS apply brakes lightly when riding on rocks or loose
surfaces.

ALWAYS use caution when going through puddles.

ALWAYS inspect the Electric Bike before each ride to insur e
a safe ride.
7. For saving the energy and extending the life of battery, please use
pedal for assistance on the electric bike when climbing the slope or
meeting windy day.
8. When in the bad weather like rain or snow, the brake distance
should be increased.
9. When the electric bikes runs at the speed of 20km /h, the wet brake
distance should be not longer than 15m. Please adjust the brake
frequently, and change the brake pad in time.
10. Check the tightness of the chain. The tightness should be about
15mm. When adjust the chain, loose the rear axle nuts, adjust the
chain tightness screw making sure the chain tightness is proper,
then tighten the rear axle screw.
11. For the safety of you and other people, cut the power supply when
it is not used.
12. Check the tire air pressure frequently. If the air pressure is too low,
the resistance will increase, affecting the running range.
13. The electric element can only be cleaned outside, no need to be
maintained for the inside. Do not open it by yourself (If these parts
opened by yourself, the warranty will not be valid any more)