MS ENERGY eBike c500, Instruction Manual

Page: 385 / 424

ENG
20
Number of
Segments
Charge in
Percentage
Number of
Segments
Charge in
Percentage
Number of
Segments
Charge in
Percentage
10
>90% 6 50% < C < 90% 2 15% < C < 25%
9
80% < C < 90% 5 45% < C < 50% 1 5% < C < 15%
8
70% < C < 80% 4 35% < C < 45% Blinking <5%
7
60% < C < 70% 3 25% < C < 35%
Charg External Mobile unit
Connect the USB cable to the port of the display and then display turn on and begin
charge. If display is in active state, charging goes automaticaally.
Maximum charge voltage is 5V, maximum charge current is 500mA
Parameter Settings
Items to be Set:
 Data reset
 km/mile

Light sensitivity
 Display backlight brightness
 Automatic off time
 Maintenance warning settings
 Check wheel diameter

Speed Limit Setting
 Battery infromation
Setting Preparation
When the display is active, press "
i
" button twice (interval < 0.3 seconds). The system
will enter the MENU parameter setting state, in which the display parameters can be
set. Press twice " i " button again (interval < 0.3 seconds) to return to the main menu.
If no operation is performed for 10
seconds, the display will return to the
normal riding display.
In the parameter setting state, when the
parameter you want to set begins to
flash, press "
+
"/ "
–
" to adjust the
parameter value. Briefly press "
i
" button
to switch between the parameters to be
set. Press "
i
" button twice (interval < 0.3
seconds) to exit the submenu.
Data reset
Press "
i
" button twice (interval < 0.3
seconds) – the display enters the MENU
state. In the speed field "
tC
" is displayed.
If you press , a "
y
" is also displayed. Now
all temporary data, e.g. maximum speed
(MAXS), average speed (AVG) and single
trip distance (TRIP) can be cleared. Briefly
press "
i
" button (< 0.3 seconds) to enter
the km/mile setting interface.