MS ENERGY eBike c500, Instruction Manual

Page: 383 / 424

ENG
18
14. Unit km/h or mile/h
15. PAS Level indication
The chosen level 1–5 will be displayed; if there is no numeric display, it means that
there is no PAS assistance.
If the rider is walking and pushing the e‐bike, " " will be displayed
Buton controller
ON/OFF button
Turn on the device, press and hold button for 2s to power on the display.
Press and hold again for 2s to power off the display, If the bike is not used, after 5 minutes
(time can be set) the display will be automatically turned off.
Assist Mode Selection
In the manual gearshift mode, press the "
+
" or "
‐
" button to choose
the motor level support.
The lowest level is Level
1
, the highest Level
5
. When the display is
on, the default mode is Level
1
. When there is no numeric mode
display, there is no power assistance.
Switch between Distance TRIP/TOTAL mode and Speed informations
Briefly press "
i
" button " " to switch between distance and speed.
Single-trip distance (TRIP km)
→
Total distance (TOTAL km)
→
Maximum speed (MAXS
km/h)
→
Average riding speed (AVG km/h)
→
Remaining distance(TO GO)
→
Real-time
output power (W)
→
Energy consumption (C)
are displayed in successive order.
Up button
Down button
Headlight button
On/Off button
Mode button