MS ENERGY eBike c500, Instruction Manual

Page: 375 / 424

ENG
10
Tips
In order to your correct use and security, please pay attention to the
following matters:
1.
In the process of use, pay attention to checking the fastening status
of the motor and front fork, and if a loose phenomenon is found, it
should be tightened timely.
2. When starting the power supply or meeting a steep slope, use the
Pedal to assist as far as possible to reduce the starting current and
extend the battery life and continuation line mileage.
3. In rainy days, please pay special attention to: when the water depth
is more than the wheel center, it is likely for the motor to soak
water, thus resulting in failure.
4. Users must use the charger specified by manufacturer for charging
the storage battery. When charging, put the battery and charger
smoothly.
5. It is prohibited that other items are covered on the battery box and
charger to impede heat, where good ventilation environment
should be maintained.
6. Please keep appropriate air pressure inside the tires, so as to avoid
increasing the resistance when driving, and easily wearing the tires
and deforming the Rim.
7. Drivers should abide by traffic rules, and the riding speed should be
controlled below 25km/h and the goods to be carried shall not
exceed Max load for rear rack.
8. When high‐speed running or downhill hard braking, do not use the
front brake to avoid the center of gravity from moving ahead, thus
resulting in danger.
Don’t tamper the electric bicycle spec and setting, if you tamper spec or
setting, you need take full responsibility for safety. Definition of tampering:
change the motor or controller, the maximum speed or maximum power or
the power assisted mode.
Suitably covering any coil spring under the saddle to prevent trapping of
fingers if you need fit a child seat on your bicycle