MS ENERGY eBike c500, Instruction Manual

Page: 386 / 424

ENG
21
If the user does not reset the data, the single trip distance and the accumulated total
riding time will be automatically cleared when the accumulated total riding time exceeds
99 hours and 59 minutes.
Note : The data will not be cleared when the display’s light‐sensing function is set to 0 or when it
is switched off!
Km/mile
When the speed field displays "
S7
", press
" + "/ " – "
to switch between km/h and mph,
or to set km or mile. Default display is km
After this , briefly press
" i "
button (< 0.3 seconds) to enter the setting of Light sensitivity.
Light Sensitivity
When the speed field displays "
bL0
",
press
" + "/ " – "
to choose a figure
between
0
and
5
.
The higher the chosen figure, the
higher the light sensitivity.
After this setting, briefly press
" i "
button (< 0.3 seconds) to enter the
setting of Backlight brightness.
Display Backlight Brightness
When the speed field displays "
bL1
",
press
" + "/ " – "
to choose a figure
between 1 and 5.
The figure 1 represents the lowest
brightness while 5 indicates the highest
display backlight brightness.
After this setting, briefly press
" i "
button (< 0.3 seconds) to enter the
setting of Automatic off time.
Automatic Off Time
When the speed field displays "
OFF
",press
" + "/ " – "
to choose a figure between 1 ‐ 9.
The figures indicate the minutes that it takes to automatically Display shut down.
After this setting, briefly press
" i "
button (< 0.3 seconds) to enter the setting of
Maintenance warning.
Maintenance Warning
(can be deactivated)
When the speed field displays "
nnA
",
press
" + "/ " – "
to choose either
0
(disabled)
or
1 (enabled)
.
1.
The display will prompt
maintenance necessity based on
such information as the
accumulated riding distance and
the battery charge cycles.