MS ENERGY eBike c500, Instruction Manual

Page: 391 / 424

ENG
26
Installation of front Disc brake *
1. Take out the Disc brake, and spin off the
two bolts in front of the disk brake;
2. Take visual inspection of the distance
between the two brake blocks of the Disc
brake should be 3 to 4mm;
3. Put the Disc brake plate into between the
two brake blocks, and fix the Disc brake on
the fixed hanger of the Disc brake of the
Front fork with two inner hexangular M6 ×
16mm bolts by 8 to 10N.m torque;
4. After the bolts are tightened, rotate the
front wheel, and listen to whether there is
any abnormal sound; if there is, need
adjust the Disc brake (Please refer to
Chapter 4 for the specific debugging
method).
① Disc brake plate ② Disc brake ③ Inner
hexangular M6×16mm bolt
④ Brake block ⑤ Fixed hanger of the Disc
brake
Note : when fixing the Disc brake bolt, drag the lower part of the Disc brake with hand, and push the
Disc brake upward as far as possible.
* Option, depends about brake type on your model
Reflection and lighting system *
The reflection system includes a reflector on the rim, front and rear passive lamp,
backpack, helmet and reflective patch on riding clothes. The lighting system is mainly
the battery or the self‐power‐generated front and rear lamp. These items help to mark
your own position when riding at night, convenient for pedestrians and other vehicles
on the roads to avoid (recommendation: purchasers in accordance with local laws and
standards use the reflector and lighting system).
There are two kinds of lighting system:
1. Connect to battery on the E‐bike
Lighting system is switched On/Off via the
LCD controller. For more information, see
the chepter "
LCD Controller
"
2. Powered by dry battery.
The photos below shows how to turn on
the front and back dry battery light.
*Some models have Lighting System controlled by the LCD Controller, some of them have Dry
batteries and controlling by the On/Off button on the Light units.
1
2
3
4
1
2
3
5
Front Light Back Light