MS ENERGY eBike c500, Instruction Manual

Page: 392 / 424

ENG
27
Rear rack
1 The largest load of the rear rack is 25Kg.
2 Do not adjust the rear rack arbitrarily, please consult the supplier to make an
adjustment if necessary.
3 Do not transport heavy objects; if a heavy object is put on the rear rack, the bike’s
steering performance will be affected and the braking performance will be reduced,
as will result in danger
7 USE AND MAINTENANCE
Your e‐bike is designed for regular road for a single person. Using your e‐bike
for extreme maneuvers, such as extreme off‐road use, jumping, or carrying
excessive load will damage the e‐bike and could cause serious injury.
Do not use high pressure water streams to clean your e‐bike, as water might
seep inside the motor or the wiring compartment and cause rusting of electric
parts or short circuits. Please use damp cloth with neutral detergent to clean
the bike body. Do not use alkali‐based or caid based detergent such as rust
cleaners as it may result in damage and/or failure of the bike body.
Avoid parking your e‐bike outside when there is rain or snow. At the end of a
trip where there was rain or snow, bring the e‐bike inside and use a clean, dry
towel to eliminate any wetness.
Everyday use and inspection of electric bike
In everyday use of the electric bike, a number of mechanical, electrical parts
will be worn, screws and other fasteners are also easy to loose and the
functions of the electrical appliances would be lost. If the occurrence of these
phenomena is not noted, it is prone to failure, and it is also prone to the risk
when cycling, so drivers must be responsible for inspection and maintenance in
peacetime.
WARNING:
If you find any broken or loose part on the bike, do not ride a bike! Fix, tight or
replace broken part before each ride!
If any safety‐critical components need to change, please contact an authorized
service for replacement.