Motion Control Engineering Motion 4000, Manual

Page: 221 / 459

F1: Program Mode
4-43
4
Motion 4000
• LIGHT LOAD WEIGHING? / LIGHT LOAD CAR CALL LIMIT
• Used only when the Light Load Weigher Input is activated. ( See “Spare Inputs Menu”
on page 4-26 ) To program this option:
• Activate the LLI input.
• Set LIGHT LOAD WEIGHING? to NO or press S to select the maximum number of car calls
registered before all car calls are canceled.
• If S is pressed, the display will read LIGHT LOAD CAR CALL LIMIT.
• Press S until the desired number is displayed.
Note
Light Load Weighing/Light Load Car Call Limit is an anti-nuisance feature. It is designed to
prevent a single person in the car from placing multiple car calls to delay the car.
• PHOTO EYE ANTI-NUISANCE? / CONSEC STOPS W/O PHE LIMIT
• When ON, car calls will be canceled if the Photo Eye input has not been activated after
a programmed number of consecutive stops. The number of consecutive stops must be
programmed before the car calls will cancel. To program this option:
• Set PHOTO EYE ANTI-NUISANCE? to NO or press S to select the number of consecutive
stops.
• If S is pressed, the display will read CONSEC STOPS W/O PHE LIMIT.
• Press S until the desired number is displayed.
Note
Photo Eye Anti-Nuisance/Consec Stops w/o PHE Limit is an anti-nuisance feature. It is
designed to prevent a single person from remaining in the car and “joy-riding” for multiple
calls.
• MG SHUTDOWN OPERATION?
• If set to Yes, if a car is idle for a period of time in excess of the MGR timer, it will recall
to its parking floor and shut down.
• CC CARD READER SECURITY?
• Enables card reader security through a dedicated HC-UIO board. Card reader spare
inputs must NOT be used when this is set to Yes. This option requires that a dedicated
HC-UIO board be used to function properly.
• WPIx LANDING? (x = A through H)
• Wandering Patient Security (Bracelet Security/Infant Abduction Security). When a
WPI input is activated, hall calls to the landing and side associated with that input are
disabled. If the elevator is already at that landing with doors open, it will be shut down
and prevented from leaving that landing. Set the landing number and the side (Front,
Rear, or Both) to be disabled when the corresponding spare input (WPIA through
WPIH) is activated.
• ALLOW CAR CALLS ON WP SEC.?
• Wandering Patient Security (Bracelet Security). If set to Yes, car calls to landings with
active WPIx inputs are allowed, otherwise, car calls to those landings are disabled.