Mitsubishi MOTORS Space Runner 1998, Workshop Manual

Page: 825 / 1164

BODY -
Slide Door
42-53
ON-VEHICLE SERVICE
DOOR FIT ADJUSTMENT
1. If the striker is not properly engaged with the latch, adjust
the door fit by moving the striker horizontally and vertically.
2. Check if the stopper touches the vehicle body properly
when the door is closed. If there is a problem, move
the stopper A horizontally and vertically to adjust.
3. Close the slide door. If the slide door is not flush with
the vehicle body or there is excessive or uneven clearance
between the door and body edges, follow the steps below:
Vertical adjustment
(1) Remove the slide door trim and waterproof film (Refer
to P.42-59.)
(2) Loosen the center roller arm and the lower roller arm
mounting bolts, and then move the center lower arm
and the lower roller arm up and down to adjust.
Inward and outward adjustment
(1) Loosen the upper roller arm and the lower roller arm
guide mounting bolts, and then move the upper roller
arm the lower roller arm guide inward and outward
to adjust.
Forward and backward adjustment
(1) Remove the slide door trim and waterproof film (Refer
to P.42-59.)
(2) Loosen the center roller arm mounting bolts, and then
insert shim(s) between the center roller arm and the
vehicle body to adjust.
Striker
Stopper A
Center roller
arm
Lower
roller arm
Upper
roller arm
Lowe roller
arm guide
Center roller arm