Mitsubishi MOTORS Space Runner 1998, Workshop Manual

Page: 507 / 1164

AUTOMATIC TRANSMISSION -
On-vehicle Service
23-47
3. Pour the new fluid in through the oil filler tube.
Adding volume: Approx. 3.5 L
Caution
Stop pouring if the 3.5 lit. of fluid cannot be poured
in.
4. Repeat the procedure in step 2.
NOTE
Drain the fluid from the cooler hose 7.0 lit. at least i step
2. Then drain the fluid a little and check the fluid for
dirt. If it has been contaminated, repeat steps 3 and 4.
5. Follow the automatic transmission fluid replacement
procedure from step 3.
OIL FILTER REPLACEMENT
23101050111
1. Use the special tool (MB991610) to remove the automatic
transmission oil filter.
2. Clean the filter bracket side mounting surface.
3. Apply a small amount of automatic transmission fluid to
the O-ring of the new oil filter.
4. Use the special tool (MB991610) to install the automatic
transmission oil filter.
NOTE
Tightening torque: 12 Nm
5. Check the quantity of the automatic transmission fluid.
(Refer to P.23-44.)
THROTTLE POSITION SENSOR ADJUSTMENT <4G93>
23100190210
Refer to GROUP 13B - On-vehicle Service.
ACCELERATOR PEDAL POSITION SENSOR
ADJUSTMENT <4G64>
23100250062
Refer to GROUP 13A - On-vehicle Service.
MB991610
Apply ATF
to O-ring