Mitsubishi MOTORS Space Runner 1998, Workshop Manual

Page: 1116 / 1164

CHASSIS ELECTRICAL -
Multi Center Display
54-104
ERROR CODE TABLE <ACCORDING TO SCREEN DISPLAY>
Error Code
No.
Error Details Detection Method (Reference) Reference
Page
1011 Ambient temperature sensor not con-
nected during diagnosis
Connection checking 54-104
1021 Fuel gauge not connected during diagno-
sis
Connection checking 54-105
1031 GPS abnormality during diagnosis Connection checking 54-105
1041 Engine-ECU not connected during diag-
nosis
Connection checking 54-105
1051 SWS not connected during diagnosis
(This error does not occur when correct
car type is set)
Connection checking 54-105
1091 CD drive too hot during diagnosis Connection checking 54-105
1092 - 1096 CD drive abnormality during diagnosis Connection checking 54-106
10A1, 10B1 Memory of navigation unit abnormality
during diagnosis
Connection checking 54-106
20D1, 30D1 Vehicle speed pulse abnormality during
diagnosis
Sensor checking 54-106
20E1, 20E2,
30E1, 30E2
Gyro level abnormality during diagnosis Sensor checking 54-106
INSPECTION PROCEDURES FOR EACH ERROR CODE <ACCORDING TO
SCREEN DISPLAY>
Error Code No. 1011
Were the wiring check instructions followed?
NO
Repeat the wiring check.
YES
Repeat the wiring check. If the same problem occurs, check ambient
temperature sensor.
Replace the ambient temperature sensor.
OK
Measure at the multi center display connector B-03.
D Disconnect connector.
D Resistance between terminal (23) and body eartth.
OK:
500 W - 100 k W
NG
Check the harness between B-03 and A-36.
OK
Replace the multi center display.
NG