Mitsubishi MOTORS Space Runner 1998, Workshop Manual

Page: 70 / 1164

ENGINE <4G6> -
Timing Belt and Timing Belt B
11A-36
3. Turn the crankshaft two revolutions in the clockwise
direction so that the timing marks are aligned. After leaving
it for 15 minutes, measure the amount of protrusion of
the auto tensioner.
Standard value (A): 3.8 - 4.5 mm
4. If the amount of protrusion is outside the standard value,
repeat the operation in steps (1) to (3).
5. Check again to be sure that the timing marks of each
sprocket are aligned.
Auto tensioner
A