Mitsubishi MOTORS Space Runner 1998, Workshop Manual

Page: 759 / 1164

STEERING -
Power Steering Gear Box
37A-27
"
K
A
TOTAL PINION TORQUE ADJUSTMENT
1. Using the special tool, rotate the pinion shaft at the rate
of one rotation in 4 to 6 seconds to check the total pinion
torque and the change in torque.
Standard value:
Total pinion torque: 0.7 - 1.4 Nm
Change in torque: 0.4 Nm or less
2. If the total pinion torque or the change in torque is outside
the standard value, return the rack support cover within 0
to 30 _ , and adjust again.
Caution
(1) When adjusting, set the standard value at its
highest value.
(2) Assure no ratcheting or catching when operating
the rack towards the shaft direction.
(3) Measure the total pinion torque through the whole
stroke of the rack.
NOTE
If the total pinion toque cannot be adjusted to the standard
value within the specified return angle, check the rack
support cover components and replace any parts if
necessary.
"
L
A
TAB WASHER/TIE ROD INSTALLATION
After installing the tie rod to the rack, fold the tab washer
end (2 locations) to the tie rod notch.
MB991006