Mitsubishi MOTORS Space Runner 1998, Workshop Manual

Page: 589 / 1164

REAR AXLE <4WD> -
Differential Mount
27B-17
A
C
"
BRACKET ASSEMBLY REMOVAL
1. Support the bottom of the differential carrier with a
transmission jack, and then remove the bracket assembly
retaining bolts.
2. Lower the front of the differential carrier, and then remove
the bracket assembly.
A
D
"
DIFFERENTIAL SUPPORT MEMBER REMOVAL
Support the bottom of the differential carrier with a transmission
jack, and then remove the bolts securing the differential carrier
to the differential support member.
INSTALLATION SERVICE POINTS
"
A
A
UPPER STOPPER/LOWER STOPPER
INSTALLATION
Install the upper and lower stoppers as shown in the illustration.
"
B
A
DIFFERENTIAL SUPPORT MEMBER INSTALLATION
Install the differential support member so that a longer
projection of its bushing faces towards the front of the vehicle.
"
C
A
BRACKET ASSEMBLY INSTALLATION
Insert a bar into the bushing inner pipe, and then push up
the inner pipe until it is parallel to the suspension crossmember
bolt. While the inner pipe is maintained at this position, install
the bracket assembly.
Transmission jack
Upper stopper
Lower stopper
Differential support member
Front of the
vehicle
Bushing
View A
View A
Suspension
crossmember
Bar