Mitsubishi MOTORS Space Runner 1998, Workshop Manual

Page: 63 / 1164

ENGINE <4G6> -
Cylinder Head Gasket
11A-29
4. Tighten the bolts by the following procedure.
Step Operation Remarks
1 Tighten to 78 Nm. Carry out in the order
shown in the illustration.
2 Fully loosen. Carry out in the reverse
order of that shown in the
illustration.
3 Tighten to 20 Nm. Carry out in the order
shown in the illustration.
4 Tighten 90 _ of a turn. In the order shown in the
illustration. Mark the head
of the cylinder head bolt
and cylinder head by paint.
5 Tighten 90 _ of a turn. In the order shown in the
illustration. Check that the
painted mark of the head
bolt is lined up with that of
the cylinder head.
Caution
1.
Always make a tightening angle just 90
_
. If it is less
than 90
_
, the head bolt will be loosened.
2. If it is more than 90
_
, remove the head bolt and repeat
the procedure from step 1.
Intake side Front of engine
Exhaust side
MB991653
8 6 1 3 9
10 4 2 5 7
Step 4
90 _
Painted mark
Step 5
90 _
Painted mark