Mitsubishi MOTORS Space Runner 1998, Workshop Manual

Page: 621 / 1164

POWER PLANT MOUNT -
Transmission Mounting/Frontmember
32-5
INSTALLATION SERVICE POINT
"
A
A
TRANSMISSION MOUNT STOPPER INSTALLATION
Install the transmission mount stopper so that the arrow faces
the direction shown.
NOTE
Disregard F and R stamped as a shared part.
FRONTMEMBER
REMOVAL AND INSTALLATION
Caution
1.
Before removing the steering gear box, refer to GROUP 52B – SRS Air Bag. Set the front wheels
straightforward, and then remove the ignition key; otherwise the SRS clock spring will be
damaged. This makes the SRS air bag inoperative and will invite serious driver injury.
2. Provisionally tighten the parts marked by an asterisk (*), and then fully tighten after loading
the full weight of the engine on the vehicle body.
Pre-removal and Post-installation Operations
D Under Cover Removal and Installation
D Side Cover Mounting Clip on Frontmember Side
Removal and Installation
D Push Dust Cover to Check that Cracks or Damage
are not present (After Installation Only)
D Front Exhaust Pipe Removal and Installation (Refer
to GROUP 15.)
D Transfer Assembly Removal and Installation <4WD>
(Refer to GROUP 22 <M/T> or 23 <A/T>.)
Engine side
Transmission
mount
bracket
Transmission
mount stopper