Mitsubishi MOTORS Space Runner 1998, Workshop Manual

Page: 240 / 1164

GDI <4G6> -
Throttle Body
13A-122
DISASSEMBLY AND REASSEMBLY
1
2
Disassembly steps
"
A
A 1. Throttle position sensor
2. Throttle body
REASSEMBLY SERVICE POINTS
"
A
A
THROTTLE POSITION SENSOR
(1) Position the throttle position sensor on the throttle body
along the dotted line as shown in the illustration.
(2) Rotate the throttle position sensor anticlockwise as shown
in the illustration, and then tighten the screws.
(3) Measure resistance value between terminal Nos. 1(sensor
power supply) and 2 (throttle position sensor 1st-channel
output) as well as 1 (sensor power supply) and 4 (throttle
position sensor 2nd-channel output).
Normal condition
Open the throttle valve slowly
from the idle position to
full-open position.
Resistance value changes
smoothly in response to
throttle valve opening angle.
(4) If the resistance value does not change smoothly, replace
the throttle position sensor.
Sensor power
supply
Earth
Throttle posi-
tion sensor
(2nd channel)
output
Throttle position sensor
(1st channel) output