Mitsubishi MOTORS Space Runner 1998, Workshop Manual

Page: 655 / 1164

REAR SUSPENSION - Suspension Crossmember
34-15
SUSPENSION CROSSMEMBER
34100680010
REMOVAL AND INSTALLATION
Caution
*:
To prevent bushings from breakage ” the parts indicated by * should be temporarily tightened,
and then fully tightened with the vehicle on the ground in the unladen condition.
Pre-removal Operation
Brake Fluid Draining
Post-installation Operation
D Brake Fluid Supplying
D Brake Line Bleeding
(Refer to GROUP 35A - On-vehicle Service.)
D Parking Brake Lever Stroke Check and Adjustment
(Refer to GROUP 36 - On-vehicle Service.)
D Wheel Alignment Check and Adjustment
(Refer to P.34-4.)
2
3
4
5
8
6
7
1
103 Nm*
55 - 65 Nm
9
15 Nm
96 Nm*
10
11
12
78 - 93 Nm
98 - 118 Nm
98 - 118 Nm
44 Nm
Removal steps
A
A
" D Lift supporting point
D
Coil spring (Refer to P.34-8.)
D Center exhaust pipe
(Refer to GROUP 15.)
D
Differential carrier assembly <4WD>
(Refer to GROUP 27.)
D
Bracket assembly <4WD> (Refer to
GROUP 27 - Differential mount.)
1. Caliper assembly
2. Brake disc
3. Shoe and lining assembly
(Refer to GROUP 36 - Parking
brake cable.)
4. Parking brake cable connection
5. Brake hose connection
6. Rear wheel speed sensor harness
connection <vehicles with ABS>
A
B
" "
B
A 7. Bolt assembly
8. Flange bolt
9. Crossmember bracket
"
A
A
10. Lower stopper
11. Suspension crossmember assembly
12. Upper stopper