Mitsubishi MOTORS Space Runner 1998, Workshop Manual

Page: 513 / 1164

AUTOMATIC TRANSMISSION -
On-vehicle Service
23-53
3. Measure the resistance between terminals 1 and 2 of
each solenoid valve.
Standard value:
Name Resistance
Damper clutch solenoid valve 2.7 - 3.4 W
Low and reverse solenoid valve
(at 20 _ C)
Second solenoid valve
Underdrive solenoid valve
Overdrive solenoid valve
4. If the resistance is outside the standard value, replace
the solenoid valve.
TORQUE CONVERTER STALL TEST
23100540275
This test measures the maximum engine speed when the
selector lever is at the D or R position and the torque converter
stalls to test the operation of the torque converter, starter
motor and one-way clutch operation and the holding
performance of the clutches and brakes in the transmission.
Caution
Do not let anybody stand in front of or behind the vehicle
while this test is being carried out.
1. Check the automatic transmission fluid level and
temperature and the engine coolant temperature.
D Fluid level: At the HOT mark on the oil level gauge
D Fluid temperature: 80 - 100 _ C
D Engine coolant temperature: 80 - 100 _ C
Reverse
clutch
Low-reverse
brake
Underdrive
clutch
Torque
converter