Mitsubishi MOTORS Space Runner 1998, Workshop Manual

Page: 1049 / 1164

CHASSIS ELECTRICAL -
Headlamp, Front Turn-signal Lamp and Front Fog Lamp
54-37
ON-VEHICLE SERVICE
54200090289
HEADLAMP AIMING
<USING A BEAM SETTING EQUIPMENT>
1. The headlamps should be aimed with the proper beam
setting equipment, and in accordance with the equipment
manufacture’s instructions.
NOTE
If there are any regulations pertinent to the aiming of
headlamps in the area where the vehicle is to be used,
adjust so as to meet those requirements.
2. Alternately turn the adjusting screw to adjust the headlamp
aiming. (Refer to P.54-37.)
<USING A SCREEN>
1. Inflate the tyres to the specified pressures and there
should be no other load in the vehicles other than driver
or substituted weight of approximately 75 kg placed in
driver’s position.
2. Set the headlamp leveling switch to the “0” position.
3. Set the distance between the screen and the centre marks
of the headlamps as shown in the illustration.
Lamp centre
Screen
5 m
Lamp centre
<SPACE RUNNER>
<SPACE WAGON>