Mitsubishi Electric SRK100VNPZJX, Technical Manual

Page: 133 / 509

-
132
-
'12 • PAC-T-174
Standard
pressure
Standard
pressure
High static
pressure setting
High static
pressure setting
Models FDU125,140VD
0
20
40
60
80
100
120
140
160
180
200
33.5
36 34 38 42 44 50
Upper
limit
Standard
air flow
Lower
limit
External s
tatic
pressure (Pa)
Model FDU100VD
Upper limit
Lower limit
High speed-High
High speed-Low
Standard-High
Upper limit
Standard-Lower
0
20
40
60
80
100
120
140
160
180
200
27 29
31 33 34 35 37 39 41
Upper
limit
Standard
air flow
Lower
limit
External static
pressure (Pa)
Upper limit
Lower limit
High speed-High
High speed-Low
Standard-High
Upper limit
Standard-Lower
40 46 48
Notes 1) Factory default setting of fan speed is [STANDARD] which has standard static pressure.
If high static pressure setting is required, change setting to [HIGH SPEED 1] with remote controller on site.
(Regarding the setting method, refer to the user's manual of remote controller for detail)
Notes 2) When setting up high static pressure, do not operate the unit under the condition of 60Pa or lower of the external static pressure.
Notes 3) The fan speed of this model can be switched between two speeds.
Standard static
pressure setting
Standard static
pressure setting
(a) Duct connected-High static pressure type (FDU)
Air flow (m 3 /min)
Air flow (m 3 /min)
1.5 CHARACTERISTICS OF FAN