Mitsubishi Electric Q80BD-J61BT11N, User Manual

Page: 61 / 362

4 - 7 4 - 7
MELSEC
4 FUNCTIONS
[Remote output]
4) The program uses the mdSend function to write the on/off information to the
"remote output RX" buffer memory.
5) The remote output RY is automatically set to on/off (for each link scan)
according to the output status stored in the "remote output RY" buffer memory.
mdSend
RY7FF to RY7F0
Remote output RY
Personal computer Master station
Remote device station
(Station number 1:
occupies 2 stations)
Remote device station
(Station number 3:
occupies 2 stations)
5)
5)
4)
RY0F to RY00
RY1F to RY10
RY2F to RY20
RY3F to RY30
RY4F to RY40
RY5F to RY50
RY6F to RY60
RY7F to RY70
RY8F to RY80 RY0F to RY00
RY1F to RY10
RY0F to RY00
RY1F to RY10
Handshaking signals
such as error reset
request flag and initial
data processing
complete flag
Handshaking signals
such as error reset
request flag and initial
data processing
complete flag
Remote input RY
Remote input RY
CC-Link Ver.2 board
Program
to
[Remote output RY when the AJ65BT-64DAV is set to station number 1]
Signal direction: Master module AJ65BT-64DAV
Device No. Signal name
RY00 CH1 analog output enable signal
RY01 CH2 analog output enable signal
RY02 CH3 analog output enable signal
RY03 CH4 analog output enable signal
RY04 Selection of offset/gain values
RY05
to
RY17
Not used
RY18 Initial data processing complete flag
RY19 Initial data setting request flag
RY1A Error reset request flag
RY1B
to
RY1F
Not used