5 - 1 5 - 1
MELSEC
5 PROCEDURE BEFORE STARTING THE DATA LINK
5 PROCEDURE BEFORE STARTING THE DATA LINK
This chapter explains the operating procedures required before starting the CC-Link
Ver.2 board operation as well as the names and settings of the CC-Link Ver.2 board
components, the wiring method, and how to perform hardware tests.
5.1 Procedures Before Operating the CC-Link Ver.2 Board
The following flowchart explains the procedures before operating the CC-Link Ver.2
board.
Start
Check
↓
□
Install the software package
Install the software package on a personal computer.
• • • Section 7.2 Installation
↓
□
Install the board
Install the board to the slot on a personal computer.
• • • Section 5.3.3 Board installation
↓
□
Set the channel No.
Set the channel No. and confirm it with the switch.
• • • Section 5.3.4 Channel No. settings
↓
□
Check the board
Test the hardware of the installed board.
• • • Section 5.7 Test
↓
□
Wire the cables
Wire the network cables for the installed board.
• • • Section 5.5 Wiring
↓
□
Set the parameters
Set the parameters and confirm them with the utility.
• • • Chapter 6 PARAMETER SETTINGS
↓
□
Check the network
Test the cable connection and data link on the network.
• • • Section 5.5 Wiring
↓
□
Execute a user program
Execute a user program or utility.
↓
Operation
CAUTION
When using the CC-Link Ver.2 board as a local board, the setting on the master
station side is required to operate the CC-Link system.
For the master station setting, refer to the user's manual of the board/module which
is used as the master station.
5
Summary of Contents for Q80BD-J61BT11N
