Mitsubishi Electric Q80BD-J61BT11N, User Manual

Page: 285 / 362

App - 23 App - 23
MELSEC
APPENDIX
Number Name Description
Availability
( : Available, : Not available)
Online
Offline Master
station
Local
station
SW0045
(645
H
)
Data link stop
result
Stores the execution result of the data-link stop instruction with
SB0002.
0 : Normal
Other than 0: Stores the error code (refer to Chapter 15).
SW0049
(649
H
)
Temporary error
invalid station
specification result
Indicates the execution result of temporary error invalid station
specification with SB0004.
0 : Normal
Other than 0: Stores the error code (refer to Chapter 15).
SW004B
(64B
H
)
Temporary error
invalid station
specification
cancel result Indicates the execution result of the temporary error invalid station
specification cancellation with SB0005.
0 : Normal
Other than 0: Stores the error code (refer to Chapter 15).
SW004D
(64D
H
)
Line test result
Indicates the execution result of the line test with SB0008.
0 : Normal
Other than 0: Stores the error code (refer to Chapter 15).
SW004F
(64F
H
)
Parameter setting
test result
Indicates the execution result of the parameter setting test with
SB0009.
0 : Normal
Other than 0: Stores the error code (refer to Chapter 15).
SW0052
(652
H
)
Automatic CC-
Link startup
execution result
Stores the system configuration check result when a new station is
added to a system using an automatic CC-Link startup.
0 : Normal
Other than 0: Stores the error code (refer to Chapter 15).
SW0058
(658
H
)
Detailed LED
display status
Stores the details of the LED display status.
0: OFF
1: ON
LINE(ERROR)
TIME(ERROR)
PRM(ERROR)
M/S(ERROR)
SW(ERROR)
LOCAL
S MST
MST
ERR.
RUN
b15 b14 b13 b12 b11 b8 b7 b6 b5 b4 b2 b1 b0 b3
0 0 0 0 0 0
b9 b10
: Cable is disconnected or the
transmission path is affected by
noise.
: Responses cannot be received from
any station due to the cable being
disconnected or the transmission
path being affected by noise.
: Invalid parameter value
: Duplicate station on the same line
: Setting Error
: Operating as a local station
: Operating as the standby master station
: Operating as the master station
: Error occurrence
: The module is operating normally.
SW0059
(659
H
)
Transmission rate
setting
Stores the contents of the transmission rate setting.
0: Cancel
1: Set
10 Mbps
5 Mbps
2.5 Mbps
625 kbps
156 kbps
b7 b6 b5 b4 b3 b1 b0 b2
0 0 0 0 0
b8 b15
to
SW005D
(65D
H
)
Forced master
switching
instruction result
Stores the execution result of the forced master switching
instruction with SB000C.
0 : Normal
Other than 0: Stores the error code (refer to Chapter 15).
2
2: Can be used for the standby master station only.