Mitsubishi Electric Q80BD-J61BT11N, User Manual

Page: 71 / 362

4 - 17 4 - 17
MELSEC
4 FUNCTIONS
[Data link startup]
1) When the personal computer is powered on, the CC-Link system automatically
starts up in accordance with the network parameters set by the CC-Link Ver.2
utility.
[Remote input]
2) The remote input RX of the intelligent device station is automatically stored (for
each link scan) in the "remote input RX" buffer memory of the master station.
3) The program uses the mdReceive function to read the input status stored in
the "remote input RX" buffer memory.
RX2F to RX20
RX3F to RX30
RX4F to RX40
RX1F to RX10
RX0F to RX00
RX5F to RX50
RX6F to RX60
RX7F to RX70
RX8F to RX80
RX7FF to RX7F0
RX2F to RX20
RX3F to RX30
RX4F to RX40
RX1F to RX10
RX0F to RX00
RX5F to RX50
RX6F to RX60
RX7F to RX70
Remote input RX
Handshaking signals
such as positioning
complete
Personal computer Master station
Intelligent device station
(Station number 1:
occupies 4 stations)
3) 2)
Remote input RX
mdReceive
CC-Link Ver.2 board
Program
to
[Remote input RX when the AJ65BT-D75P2-S3 is
set to station number 1]
Signal direction: AJ65BT-D75P2-S3 Master module
Device No. Signal name
RX00 D75P2 ready complete
RX01 Single-axis start complete
RX02 Dual-axes start complete
RX03 Use prohibited
RX04 Single-axis BUSY
RX05 Dual-axis BUSY
RX06 Use prohibited
RX07 Single-axis positioning complete
RX08 Dual-axis positioning complete
to to