Mitsubishi Electric Q80BD-J61BT11N, User Manual

Page: 173 / 362

11 - 5 11 - 5
MELSEC
11 COMMUNICATION BETWEEN THE MASTER STATION AND REMOTE
DEVICE STATION
11.1.4 Creating a Program
Create the digital value setting program for performing the initial setting and outputting
analog values for remote device stations.
The following illustrates the relation between the remote device station’s I/O operations
and the user program when controlling the remote device station, and how the digital
value settings for the initial setting and analog outputs controls the system.
(The shaded areas indicate the devices that are actually used.)
: Default values are used for the initial settings except the analog output
enable/disable setting.
RX18
RX19
:
RX1B
CC-Link Ver.2 board
X18 (initial data processing request flag)
Remote device station (station No. 1)
Master station (station No. 0)
Personal computer
User program
mdReceive
X19 (initial data setting completion flag)
X1B (remote READY)
:
:
:
:
:
mdSend
RY00
RY18
Remote inputs (RX)
Remote outputs (RY)
RY19
:
:
RWw0 (CH1 digital value setting area)
RWw0
Remote registers
(RWw)
:
RWw8 RWw8
mdSend
2)
mdSend
mdSend
Y19 (initial data setting request flag)
:
:
Y18 (initial data processing completion flag)
Y00 (CH1 analogue output enable flag)
:
:
(analogue output enable/disable setting area)
14)
8)
18)
18)
1)
13)
7)
17)
17)
19)
5) 9)
11) 15)
12)
6) 10)
12) 16)
19)
3)
20)
4)