Mitsubishi Electric Q80BD-J61BT11N, User Manual

Page: 241 / 362

16 - 7 16 - 7
MELSEC
16 TROUBLESHOOTING
Screen Instruction
Confirm the publisher is "MITSUBISHI ELECTRIC
CORPORATION", and click the Install button.
This screen may be displayed a couple of times.
The message is displayed when .NET Framework 3.5
(including .NET 2.0 and 3.0) is set to disabled.
Reinstall the utility after searching the "Turn Windows
features on or off" on the control panel and enabling
the function of ".NET Framework 3.5 (including .NET
2.0 and 3.0)".
The procedure when .NET Framework 3.5
(including .NET 2.0 and 3.0) is disabled is the same
procedure as MELSOFT products. For details of the
procedure, refer to the technical bulletin FA-A-0153 or
FA-A-0207.
The message is displayed when a function that is
necessary for installation has been set to disabled in
Windows.
Enable the setting by following the procedure shown
below.
1. Select [Control Panel] - [System and Security] -
[Administrative Tools] - [Local Security Policy].
2. Select [Local Policies] - [Security Options].
3. Select "Enable" for "User Account Control: Detect
application installations and prompt for elevation".
4. Restart the personal computer.
16.2.4 When the driver is not installed
The driver is installed automatically when installing the board on the personal
computer after installing the software package.