Mitsubishi Electric Q80BD-J61BT11N, User Manual

Page: 72 / 362

4 - 18 4 - 18
MELSEC
4 FUNCTIONS
[Remote output]
4) The program uses the mdSend function to write the on/off information to the
"remote output RY" buffer memory.
5) The remote output RY of the intelligent device station is automatically set to
on/off (for each link scan) according to the output status stored in the "remote
output RY" buffer memory.
RY2F to RY20
RY3F to RY30
RY4F to RY40
RY1F to RY10
RY0F to RY00
RY5F to RY50
RY6F to RY60
RY7F to RY70
RY8F to RY80
RY7FF to RY7F0
RY2F to RY20
RY3F to RY30
RY4F to RY40
RY1F to RY10
RY0F to RY00
RY5F to RY50
RY6F to RY60
RY7F to RY70
Remote input RX
Handshaking signals
such as positioning
complete
Personal computer Master station Intelligent device station
(Station number 1: occupies 4 stations)
mdSend
3) 2)
Remote input RX
CC-Link Ver.2 board
Program
to
[Remote output RY when the AJ65BT-D75P2-S3 is
set to station number 1]
Signal direction: AJ65BT-D75P2-S3 Master module
Device No. Signal name
RY01 to RY0F Use prohibited
RY10 Single-axis positioning start
RY11 Dual-axis positioning start
RY12 Use prohibited
RY13 Single-axis stop
RY14 Dual-axis stop
to to