Minebea Intec CSD-918 Series, Operating Instructions Manual

Page: 194 / 240

Check the gate operation.
↓
Is the wiring correct? → No →
↓
Yes
↓
Refer to Chapter 4.4 and conirm the
speciications of the servo motor and
the servo ampliier.
Are the set values of the servo
ampliier and servo motor cor-
rect?
→ No →
↓
Yes
↓
Refer to Chapter 7 and 11 and conirm
the speciications of the servo motor
and the servo ampliier.
Is a positional calibration exe-
cuted correctly?
→ No →
↓
Yes
↓
Refer to Chapter 7.6 and conirm the
speciications of the servo motor and
the servo ampliier.
Is the intended operation exe-
cuted?
→ No →
↓
Yes
↓
Refer to Chapter 7 and 11 and conirm
the speciications of the servo motor
and the servo ampliier.
Provide Minebea Intec with details
of malfunction.
Check the measuring opera-
tion.
↓
Is the setting of I/O correct? → No →
↓
Yes
↓
Change the setting (refer to Chap-
ter 10 ).
Are BRAND set values suitab-
le?
→ No →
↓
Yes
↓
Conirm and change set values (refer to
Chapter 11.1 ).
Is the intended operation exe-
cuted?
→ No →
↓
Yes
↓
Set weighing and sequence control
operations (refer to Chapter 11.7 and
11.8 ).
Provide Minebea Intec with details
of malfunction.
Weight Controller CSD-918 19 Troubleshooting
EN-192 Minebea Intec