10.5.3
Temporary release method of menu key lock
When the menu key locking is set, a temporary release procedure is as follows;
Note:
When you tap the key whose key lock is targeted, the buzzer sounds for two times.
10.6 Switch of the weighing screen (SELECTION OF SCREEN)
This is the function to switch the display of the weighing screen.
In SIMPLE display mode, all information boxed area in the below igure can set as non-
display.
10.6.1
Weighing screen switching method
10.6.2 Switch of STANDARD/SIMPLE
The weighing screen is switched as follows by setting to [STANDARD/SIMPLE].
Touch for 3 seconds
Switch
SIMPLE display
STANDARD display
Touch for 3 seconds
Tap the below slanted section for over three seconds.
After sounding the reorganization buzzer, the menu becomes efective only for 3
seconds.
1. Select [MENU].
2. Select [BASIC FUNCTION] is on the menu screen 1/2.
3. Select [SELECTION OF SCREEN] is on the basic function setting screen 4/4.
4. Select [STANDARD], and tap [OK] when the screen is displayed by [STANDARD].
5. Select [STANDARD/SIMPLE], and tap [OK] when a screen is displayed by [SIMPLE].
Weight Controller CSD-918
10 I/O setting (I/O)
EN-92
Minebea Intec
Summary of Contents for CSD-918 Series
Page 239: ......
