2.3.3
Power supply
WARNING
Working on the instrument while it is switched on may have life-threatening
consequences.
If the power is ON, the operator may get an electric shock or the device may be
damaged.
Check that the power supply is OFF when installing cables.
Before switching on the power, check that the supplied power is identical to the
device voltage/speciications. Please contact a Minebea Intec sales or service oice
if they do not match.
Failing to check the above may cause damage to the device or result in electric
shock.
WARNING
Working on an ungrounded instrument may have life-threatening consequences.
If the instrument is not grounded, the instrument may malfunction or the operator may
receive an electric shock.
It is essential to ground the device with grounding wire.
2.3.4
Operating precautions
CAUTION
Warning of personal injury and damage to property.
Incorrect wiring may falsify weighing results, lead to malfunction of the instrument,
damage peripheral equipment or lead to critical accidents.
Check that all wires are connected properly before use CSD-918.
NOTICE
Warning of damage to property.
Falsify weighing results, malfunction of the instrument or damage to peripheral
equipment are possible.
Calibrate the instrument before irst-time use or when replacing the load cells.
Recalibrate if problems persist after calibration.
NOTICE
Warning of damage to property.
Falsify weighing results, malfunction of the instrument or damage to peripheral
equipment are possible.
Do not change device settings during measurement.
Weight Controller CSD-918
2 Safety instructions
EN-14
Minebea Intec
Summary of Contents for CSD-918 Series
Page 239: ......