Minebea Intec CSD-918 Series, Operating Instructions Manual

Page: 146 / 240

5 ERROR lag logic
The logic of the error output is selectable from [Negative logic] or [Positive logic].
[Negative logic] is set as default.
6 P.C. (print command) Logic
The logic of P.C. output is selectable from [Negative logic] or [Positive logic].
[Negative logic] is set as default.
7 P.C. (print command) width
The data width of P.C. output is selectable from [125 ms], [25 ms] or [5 ms].
[125 ms] is set as default.
8 BCD output times
The numbers of BCD output times is selectable from [100 times/s], [20 times/s] or
[4 times/s].
[4 times/s] is set as default.
Note:
-
Before and after starting up the print command, BCD output becomes unstable due
to the conversion of BCD data.
- Please read the correct BCD data at the timing of the falling of the print command.
- The internal circuit is insulated with optocoupler.
17.2.4 Pin assignment of the BCD output
The BCD output are divided into two with the setting of [Output target].
At the time of setting load display, gross weight, net weight and tare weight
A1
1 x 10
0 B1
2 x 10
0
A2
4 x 10
0 B2
8 x 10
0
A3
1 x 10
1
B3
2 x 10
1
A4
4 x 10
1 B4
8 x 10
1
A5
1 x 10
2 B5
2 x 10
2
A6
4 x 10
2
B6
8 x 10
2
A7
1 x 10
3 B7
2 x 10
3
A8
4 x 10
3 B8
8 x 10
3
A9
1 x 10
4
B9
2 x 10
4
A10
4 x 10
4 B10
8 x 10
4
A11
1 x 10
5 B11
2 x 10
5
A12
4 x 10
5
B12
8 x 10
5
A13 ERROR B13 N. C.
Weight Controller CSD-918 17 Options
EN-144 Minebea Intec