7
Safety check condition during DISCHARGE operation (DISCH.SAFETY CHECK)
The safety check condition during the discharge operation is set.
The safety check condition is selectable from [ON] or [OFF] for each of [SAFETY
CHECK 1] to [SAFETY CHECK 8] respectively.
Refer to Chapter
.
8 Safety check condition during MIXING operation (MIXING SAFETY CHECK)
The safety check condition during the mixing operation is set.
The safety check condition is selectable from [ON] or [OFF] for each of [SAFETY
CHECK 1] to [SAFETY CHECK 8] respectively.
Refer to Chapter
.
9 Safety check condition of whole sequence (GENERAL SAFETY CHECK)
The safety check condition of whole sequence is set.
The safety check condition is selectable from [ON] or [OFF] for each of [SAFETY
CHECK 1] to [SAFETY CHECK 8] respectively.
Refer to Chapter
.
10 Automatic accumulation function (AUTOMATIC ACCUM)
The operation condition of automatic accumulation function is selectable from
[OFF], [SYNC.WITH FINISH] or [AUTO ACCUM. AT STABLE].
[OFF] is selected as default.
Refer to Chapter
for the automatic accumulation function.
11 Automatic accumulation condition (CONDITION OF AUTO ACM.)
The operation condition of automatic accumulation function is selectable from [IN
OK MODE] or [NO CONDITION].
[NO CONDITION] is selected as default.
Refer to Chapter
for the automatic accumulation function.
12 Automatic printing function (AUTOMATIC PRINT)
The automatic printing function is selectable from [EFFECTIVE] or [INVALID].
[INVALID] is selected as default.
Refer to Chapter
for the printing function.
11.8 Setting item of sequence control (SEQUENCE CONTROL)
The parameter in the Sequence mode is set.
11.8.1
Switch to sequence control setting screen
Changes from weighing screen to sequence control setting screen by the following
operations.
1. Select [MENU].
2. Select [SEQUENCE CONTROL] on menu screen 1/2.
Weight Controller CSD-918
11 Weighing mode
EN-122
Minebea Intec
Summary of Contents for CSD-918 Series
Page 239: ......
