-
The supplementary low is executed up to the times set by the maximum times of
supplementary low described in Chapter
. When the Under signal does not
output at less times than the set value, the supplementary low shall be inished at
that time.
-
The UNDER signal is output even if the supplementary low is applied with the same
times of the maximum supplementary low, it will become the sequence error (SQ
ERR2).
-
The comparative target of ZERO BAND and the comparative target of FULL value
is selectable from [GROSS], [NET], [?GROSS?], [?NET?] or [OFF].
-
The near zero is simple comparison operation.
-
Coarse low, Middle low and Fine low will never become ON until the next start
signal will be input, once it turns OFF.
-
Under, Over and OK can be operated with net weight.
The comparison operation can be changed to simple comparison.
-
When applying the automatic tare cancellation at the time of low start,
[EFFECTIVE] must be set (refer to Chapter
).
11 Weighing mode
Weight Controller CSD-918
Minebea Intec
EN-113
Summary of Contents for CSD-918 Series
Page 239: ......
