11 Weighing mode
11.1 Brand setting (BRAND CODE)
The comparison value and the brand name (product name) etc. per each brand (product)
are set in the brand setting.
The weighing is controlled to become the target value of the weighing by the various
setting value for the brand.
The maximum 100 kinds of brands can be registered in the instrument.
11.1.1
Switch to brand code screen
The screen is switched from weighing screen to brand code screen by the following
operations.
11.1.2
Method of setting brand
1
2
Note:
The brand setting cannot be changed during each mode weighing at the weighing
mode.
1. Select [MENU].
2. Select [BRAND CODE] on menu screen 1/2.
1. The brand number (product number) is selected by touching [↑] and [↓]. Various set
values are displayed along with the change of brand columns.
The each item in brand number selected is set.
2. The selected brand is set as a valid brand by tapping [OK] to apply it to weighing
operation.
Weight Controller CSD-918
11 Weighing mode
EN-94
Minebea Intec
Summary of Contents for CSD-918 Series
Page 239: ......
