- 4.14 -
7.
Open the maintenance cover, then chenging
the wiper.
8.
Holding the projections at both ends, draw out
the wiper.
Use the gloves that are supplied with the separately-available
cleaning wiper to protect your hands from stains.
9.
Holding the projections at both ends, insert a
new wiper into place.
•
Contacting the rubber portion of a new wiper
shall be avoided. It can cause the nozzle to be
clogged.
•
Insert the wiper so that its felt side surface is
placecd on the left as viewed from your
position.
10. Clean the wiper guide shaft using a cotton bud
or cloth.
(If dirt is hard to remove, use a cotton bud of cloth
damepened with water.)
•
Extremely dirty wiper guide shaft may cause
operation failure of the wiper, resulting in error
display.
11. Open the front cover and move the carriage
manually.
Move the carriage to the position so that the bottom of the
slider be cleaned easily.
Guide shaft
Summary of Contents for JV4 Series
