MIMAKI JV4 Series, Operation Manual

Page: 59 / 152

- 1.41 -
After setting the medium
After the medium is set and the front cover is closed, the carriage starts moving to detect the me-
dium. When the medium is detected, the device enters the LOCAL mode.
Display on the LCD
When couting the amount of remaining roll media, input the length of set media.
1. Push the JOG keys [ ], [ ] to input the length
of media.
2. Push the [ENTER] or [END] key to return to the
local mode.
•
If a transparent or plotted medium is set, the following message appears on
the LCD and the medium may not be detected.
• For the method of setting up the medium detection function, see page 3.16.
• When the device is shipped from the factory, the medium detection function
is set to [SELECT]. Select the type of medium set and execute the medium
detection function.
• If the medium is exposed to direct sunshine, the medium width may not be
detected correctly.
Changing media
• When changing medium, be sure to check that the head height has been
adjusted.
<< LOCAL >>
width : 1272mm
ERROR 50
MEDIA SENSE
MEDIA LENGTH SET
50 m
<< LOCAL >>
width : 1272mm