MIMAKI JV4 Series, Operation Manual

Page: 101 / 152

- 3.21 -
PUTTING OUT PLOTTING CONDITIONS THAT HAVE BEEN SET [MODE STAMP]
This function plots the plotting conditions set by the function menu or output software after the
image data is output.
The plotting conditions that are put out by this function are convenient since they allow for compari-
son of output images and provide a record of plotting data.
STEP
1. Select a type.
(See page 3.4). Here, select [Type.1].
2. Push the [ENTER ] key.
3. Push the [ ] and [ ] key until the display gives
the indication [MODE STAMP].
4. Push the [ENTER] key.
5. Set a type of ink to be used by pushing the
JOG keys [ ] and [ ] .
Here, select [ON].
6. Push the [ENTER] key.
7. Push the [END] key twice, and the menu returns
to the LOCAL mode.
SET UP
SELECT
: TYPE.1
TYPE.1
PRINT MODE
< ent >
TYPE.1
MODE STAMP
< ent >
TYPE.1
MODE STAMP
: OFF
TYPE.1
MODE STAMP : ON
TYPE.1
MODE STAMP
< ent >
<< LOCAL >>
width : 1272mm
Medium feeding direction