MIMAKI JV4 Series, Operation Manual

Page: 91 / 152

- 3.11 -
DECIDING THE PRIORITY OF SETTINGS BY THE COMPUTER OR THE DEVICE
[PRIORITY]
This function gives priority to either the plotting conditions set on the computer or the plotting
conditions set on the device.
Plotting conditions can be set on data of the device and on data received from the computer using the
output software. If these plotting conditions differ, priority is given to either of them at the time
when the plotting operation is started.
HOST : The plotting operation is performed with priority given to the plotting
conditions set on the computer.
PLOT : The plotting operation is performed with priority given to the plotting
conditions set on the device.
Priority needs to be specified for each of the following items:
• PRINT MODE • MEDIA COMP.
• INK LAYERS • INK TYPE
• DRYING TIME • REFRESH
•
AUTO CUT
STEP
1. Select a type.
(See page 3.4). Here, select [Type.1].
2. Push the [ENTER] key.
3. Push the [ ] and [ ] key until the display gives
the indication [PRIORITY].
4. Push the [ENTER] key.
5. Push the [ ] and [ ] key to select priority
[HOST] and [PLOT].
Here, select [PLOT].
6. Push the [ENTER] key.
7. Push the [ ] and [ ] key to select priority
[HOST] and [PLOT].
Here, select [PLOT].
8. Push the [ENTER] key.
SET UP
SELECT
: TYPE.1
TYPE.1
PRINT MODE
< ent >
TYPE.1
PRIORITY
< ent >
TYPE.1
PRINT MODE
: HOST
TYPE.1
PRINT MODE
: PLOT
TYPE.1
INK LAYERS
: HOST
TYPE.1
INK LAYERS
: PLOT
TYPE.1
DRYING TIME
: HOST