- 1.35 -
2. Push down the head height adjustment rod by the
right hand.
Push down the head height adjustment rod till it
stops moving anymore.
•
If the tip of the head height adjustment rod
makes contact with the surface of the medium,
repeat step (6)-1 shown on the preceding page
to raise the head.
3. Turn the head height adjustment screw in the
direction shown and move the head downward.
With the head height adjustment rod kept pushed,
lower the head till the tip of the rod makes contact
with the surface of the medium used.
4. Retighten the support screw after completing the
head height adjustment.
7.
Close the front cover.
8.
Push the [ENTER] key.
The carriage will come back to the capping station.
9.
The device enters the LOCAL mode.
<< LOCAL >>
width : 1272mm
Medium
Tip of the head
height adjustment rod
Summary of Contents for JV4 Series
