- 4.21 -
FOR PLOTTING WITH ONLY ONE INK STATION [USE HEAD]
This function can be set when making plotting using only one ink station in the "Setting for 1Way
high-speed printing" mode. (See page 1-27.)
Use this function if nozzle missing cannot be recovered even after repetitive cleaning or if plotting
with higher quality is required.
ALL
:
Both the F-row ink station and R-row ink station are used for
plotting.
REAR
:
Only the R-row ink station is used for plotting.
FRONT
:
Only the F-row ink station is used for plotting.
•
When different ink types are loaded as in the "Setting for 1Way high-speed
printing" mode, the [USE HEAD] function cannot be set because it is not
displayed in the menu. (See page1-28)
STEP
1.
Put the device into the FUNCTION mode.
(See page 4.3)
2.
Push the [ENTER] key.
3.
Push the [ ] and [ ] key until the display gives
the indication [USE HEAD].
4.
Push the [ENTER] key.
5.
Select the [USE HEAD] by pushing the JOG
keys [ ] and [ ].
[ALL], [REAR], [FRONT]
Hear select [FRONT].
6.
Push the [ENTER] key.
7.
Push the [END] key twice, and the menu re-
turns to the LOCAL mode.
FUNCTION
MAINTENANCE
< ENT >
MAINTENANCE
LIST
< ent >
MAINTENANCE
USE HEAD
< ent >
MAINTENANCE
USE HEAD
: ALL
MAINTENANCE
USE HEAD
: FRONT
MAINTENANCE
USE HEAD
< ent >
<< LOCAL >>
width : 1272mm
Summary of Contents for JV4 Series
