MIMAKI JV4 Series, Operation Manual

Page: 58 / 152

- 1.40 -
9. Open the front cover and pull out the roll
medium.
Take care not to crease the roll medium while it is pulled out.
10. Push down the clamp lever at the front of the
device.
Fix the roll medium that has been pulled out with the pinch
rollers.
• Check that there is no slack or wrinkle, caused
by uneven tension, on the roll paper in the
range between the roll holder and the platen.
While pulling the roll paper from side to side
evenly, clamp the lever. (See page 3-25.)
• If the roll medium used is wide, the edges of the
paper may get loose from the platen during
plotting. Use the medium edge holder to hold
down the edges of the medium. This prevents
the medium from being stained with the ink by
getting loose from the platen.
• When using a thick medium, remove the curl
stopper from the medium before plotting.
11. Close the front cover.
With the front cover kept open, the device cannot perform the
plotting operation.
Medium
Curl
Stopper