MIMAKI JV4 Series, Operation Manual

Page: 55 / 152

- 1.37 -
SETTING THE MEDIUM ON THE DEVICE
The medium that can be used with the device are roll medium, cut sheet medium, and board (See
page 1.31).
SETTING A PAPER ROLL ON THE DEVICE
The procedure for setting roll medium on the device is described below. Use roll medium exclusive
for the device. (See page 1.31)
• The roll medium is heavy in weight. Take care not to drop it on your foot.
• When setting the medium, be sure to check that the head height has been
properly adjusted. (See page 1.34)
STEP
1. Pull up the clamp lever at the back of the
device.
The roll holder is prevented from moving forward anymore. It
can freely move backward.
2. Insert the let-hand roll holde into the core of
the roll medium.
Push roll medium onto the roll holder till the roll core no
longer moves.
The inside diameter of the roll medium core may be 2 inches
or 3 inches.
Fit the roll medium to the roll holder appropriate to the core
inside diameter. (See page 1.16)