MIMAKI JV4 Series, Operation Manual

Page: 44 / 152

- 1.26 -
INITIAL SETTING OF INKS
When using the device for the first time, it is necessary to install ink cartridges in the device.
Use the following procedure to install the ink cartridges.
STEP
1. Turn the power on.
After the initial operation, the device displays the type of ink
set in each ink station.
2. By pushing the JOG keys [ ] and [ ], specify
the type of ink set in the R-row ink station.
[Pigcm] Water-soluble pigment ink
(light cyan, light magenta)
[PigOG] Water-soluble pigment ink
(Orange, Green)
[Dye] Water-soluble dye ink
[Sub] Disperse dye ink
3. Move the cursor by pushing the JOG keys
[ ] and [ ].
4. By pushing the JOG keys [ ] and [ ], specify
the type of ink set in the F-row ink station.
5. Push the [ENTER] key.
6. Insert the ink cartridges into the ink stations.
Align two projecting portions of the ink cartridge with rails on
the ink stations. Once the ink cartridge is inserted to reach
the normal position, the buzzer will sound.
7. The print head is automatically filled with ink.
8. Once the ink-filling procedure completes, the
device enters the LOCAL mode.
INK TYPE
R : Pigcm
F : Dye
INK TYPE
R : Dye
F : Dye
INK TYPE
R : Dye
F: Dye
INK TYPE
R : Dye
F : Pigcm
CARTRIDGES SET
FILL UP
<< LOCAL >>