- 3.23 -
STEP
1.
Select a type.
(See page 3.4). Here, select [Type.1].
2.
Push the [ENTER] key.
3.
Push the [ ] and [ ] key until the display gives
the indication [ARTWORKmode].
4.
Push the [ENTER] key.
5.
Set ARTWORKmode by pushing the JOG keys
[ ] and [ ].
[OFF] :
Jump to Step 10.
[ON]
:
Specify image quality, plotting density.
Here, select [ON].
6.
Push the [ENTER] key.
7.
Select a image quality by pushing the JOG
keys [ ] and [ ].
Select [STANDARD1 to 3] or [QUALITY1to 3]
Here, select [STANDARD1].
8.
Push the [ENTER] key.
9.
Select a plotting density by pushing the JOG
keys [ ] and [ ].
Select [NORMAL] or [THIN]
Here, select [THIN].
10. Push the [ENTER] key.
11. Push the [END] key twice, and the menu returns
to the LOCAL mode.
TYPE.1
ARTWORKmode
: ON
TYPE.1
ARTWORK
DRAW : STANDARD1
TYPE.1
ARTWORK
DRAW : STANDARD1
TYPE.1
ARTWORK
DENSITY : NORMAL
TYPE.1
ARTWORK
DENSITY : THIN
TYPE.1
ARTWORKmode
< ent >
<< LOCAL >>
width : 1272mm
SET UP
SELECT
: TYPE.1
TYPE.1
PRINT MODE
< ent >
TYPE.1
ARTWORKmode
< ent >
TYPE.1
ARTWORKmode
: OFF
Specifying ink thickness in ARTWORKmode
Specify a plotting density in ARTWORKmode. The thickness (amount) of ink should be set so that
the ink may not run on the medium.
NORMAL
:
Standard plotting density
THIN
:
The ink runs less on the medium.
Summary of Contents for JV4 Series
