MIMAKI JV4 Series, Operation Manual

Page: 63 / 152

- 1.45 -
• Align the edge of the front side of the board with
the guide (absorption hole) which is the closest
to you provided on the platen.
4. Close the front cover.
The device starts detecting the medium.
5. Push the [ENTER] key.
After the initial operation, the device enter the LOCAL mode.
(See page 1-20)
After setting the medium on the device
The medium can be detected after setting it and push down the clamp lever at the front of the device.
Turn ON the [BOARD] setting for media detection to detect the board.
Display on the LCD
Press the JOG key [ ] to detect the board.
After detection of the medium width, return the board to the
position where the leading dead space becomes 5mm.
ROLL < > LEAF
V : BOARD
Board
Guide for Board medium