MIMAKI JV4 Series, Operation Manual

Page: 115 / 152

- 4.5 -
PLOTTING HEX CODE OF PLOTTING COMMAND [DATA DUMP]
This function plots data commands received from the computer, in HEX code.
The HEX code is an alphanumeric representation of plotting commands.
By using this code, it is possible to check if there are any abnormal data commands.
•
When this function is used to output data commands on a sheet of paper,
use A4 or larger size with the long side set horizontally.
• DATA DUMP automatically feeds line according to the size of paper used.
STEP
1. Put the device into the LOCAL mode.
(See page 4.3)
2. Push the [ENTER] key.
3. Push the [ ] and [ ] key until the display gives
the indication [DATA DUMP].
4. Push the [ENTER] key.
Drawing the DATA DUMP is started.
5. The device enters the LOCAL mode.
FUNCTION
MAINTENANCE
< ENT >
MAINTENANCE
LIST
< ent >
MAINTENANCE
DATA DUMP
< ent >
MAINTENANCE
* * DATA DUMP * *
<< LOCAL >>
width : 1272mm