MIMAKI JV4 Series, Operation Manual

Page: 93 / 152

- 3.13 -
INCREASING (DECREASING) THE RIGHT AND LEFT MARGINS OF THE MEDIUM
This function sets a dead space to increase/decrease the right and left margins of the medium. The
blank portion of the medium is called dead space. (See page 1.46)
The function is used to increase the margin for binding.
You can set a dead space for each of the right and left margins of the medium.
DEAD SPACE
JV4-130/160 : Can be set in 1 mm increment from -9 mm to 95 mm.
JV4-180 : Can be set in 1 mm increment from -29 mm to 75 mm.
Setting [RIGHTmargin]
STEP
1. Select a type.
(See page 3.4). Here, select [Type.1].
2. Push the [ENTE] key.
3. Push the [ ] and [ ] key until the display gives
the indication [MARGIN].
4. Push the [ENTER] key.
5. Push the [ENTER] key.
6. Set a dead space by pushing the JOG keys [ ]
and [ ] .
You can set a dead space in the range -9 mm to 95 mm in
increments of 1 mm.
Here, set [10mm].
7. Push the [ENTER] key.
8. Select the following operation.
To set LEFTmargin, push the ENTER key (after setting
RIGHTmargin) and select Dead Space (LEFTmargin) by
pushing the JOG keys [ ] and [ ] .
Push the [END] key twice, and the menu returns to the
LOCAL mode.
SET UP
SELECT
: TYPE.1
TYPE.1
PRINT MODE
< ent >
TYPE.1
MARGIN
< ent >
TYPE.1
RIGHTmargin
< ent >
TYPE.1
RIGHTmargin
: 0mm
TYPE.1
RIGHTmargin
: 10mm
TYPE.1
MARGIN
< ent >
TYPE.1
LEFTmargin
< ent >
<< LOCAL >>
width : 1272mm