- 3.27 -
FOR CONTINUING PLOTTING WITH SMALL AMOUNT OF REMAINING INK
[PRINT CONT.]
Even if [INKnearEND] occurs, plotting can be continued using either ink station with remaining ink.
ON
:
Continues plotting using the other ink station without
[INKnearEND] indication. (Each time plotting to one page is
completed, plotting is continued without entering the local mode.)
OFF
:
If [INKnearEND] occurs, each time plotting to one page is
completed, the local mode is entered and plotting interrupted.
•
If different types of ink are set in the two ink stations, this function cannot be
used since [PRINT CONT.] is not displayed on the LCD.
STEP
1.
Select a type.
(See page 3.4). Here, select [Type.1].
2.
Push the [ENTER] key.
3.
Push the [ ] and [ ] key until the display gives
the indication [PRINT CONT.].
4.
Push the [ENTER] key.
5.
Set a [PRINT CONT.] by pushing the JOG keys
[ ] and [ ].
Here, select [ON].
6.
Push the [ENTER] key.
7.
Push the [END] key twice, and the menu returns
to the LOCAL mode.
•
When plotting is made using only one ink station, the plotting time becomes
longer.
At the time [INKnearEND] occurs during plotting, plotting is canceled.
SET UP
SELECT : TYPE.1
TYPE.1
PRINT MODE
< ent >
TYPE.1
PRINT CONT.
< ent >
TYPE.1
PRINT CONT.
: OFF
TYPE.1
PRINT CONT.
: ON
TYPE.1
PRINT CONT.
< ent >
<< LOCAL >>
width : 1272mm
Summary of Contents for JV4 Series
